Skip to:Content
|
Bottom
Hot deformation and processing of aluminum alloys için kapak resmi
Başlık:
Hot deformation and processing of aluminum alloys
Yazar:
McQueen, H. J.
ISBN:
9781420017687
Yayın Bilgileri:
Boca Raton : CRC Press, 2011.
Fiziksel Tanımlama:
xxxii, 585 p. : ill.
Seri:
Manufacturing engineering and materials processing ; 75
Seri Başlığı:
Manufacturing engineering and materials processing ; 75
İçerik:
ch. 1. Aluminum and its alloys -- ch. 2. Metal forming and deformation modes -- ch. 3. Hot work testing techniques -- ch. 4. Hot working of aluminum -- ch. 5. Hot working of dispersoid and solute alloys -- ch. 6. Precipitation hardening alloys -- ch. 7. Aluminum matrix composites -- ch. 8. Comparison of hot working of other metals -- ch. 9. Creep : strain rates below 10-4 s-1 -- ch. 10. Cold working -- ch. 11. Static restoration, annealing -- ch. 12. Thermomechanical processing -- ch. 13. Superplasticity -- ch. 14. Extrusion -- ch. 15. Rolling -- ch. 16. Hot and cold forging.
Özet:
"PREFACE This book offers readers a fairly comprehensive discussion of the hot working of aluminum and aluminum alloys. It is intended to provide an explanation of the possible microstructural developments that can occur with hot deformation of a variety of alloys and the kind of mechanical properties that can be anticipated. The microstructures that evolve with torsion, compression, extrusion and rolling are presented based on extensive analysis from polarized light optical microscopy (POM), transmission electron microscopy (TEM), x-ray diffraction (XRD) scanning electron-microscopy with electron backscatter imaging (SEM-EBSD) and orientation imaging microscopy (OIM). The microstructural analysis leads to detailed explanations of dynamic recovery (DRV), static recovery (SRV), discontinuous dynamic recrystallization (dDRX), discontinuous static recrystallization (dSRX), grain defining dynamic recovery (gDRV) (formerly geometric dynamic recrystallization gDRX) and continuous dynamic recrystallization involving a single phase (cDRX/1-phase) and multiple phases, (cDRX/2-phase). Hot working is carefully explained in the context of other elevated temperature phenomena, some of which "overlap" hot working. These include creep, superplasticity, cold working and annealing. Creep plasticity occurs at both warm and hot working temperatures, but is usually associated with lower strain-rates and relatively small strains. On the other hand superplasticity involves high tensile strains at similar temperatures, but lower strain rates than utilized in hot working"-- Provided by publisher.
Yazar Ek Girişi:
Ayırtma:
Kopya:

Rafta:*

Kütüphane
Materyal Türü
Demirbaş Numarası
Yer Numarası
Durumu/İade Tarihi
Materyal Ayırtma
Arıyor...
E-Kitap 289446-1001 ONLINE
Arıyor...

On Order

Go to:Top of Page